Semi-automatic Impact Testing Machine

JB-150B-type impact testing machine is used for the measuring the performance of metal materials’ resistance in the process of dynamic loading impact, in order to judge the character of the material under dynamic load. In accordance with the national standard GB/T3808-2002 "pendulum-type impact test machine”, this testing machine has been developed and produced; then according toGB/T229-2007"metal Charpy notched impact test method" ,the metal material has been impact tested, the maximum impact energy is 150J and with one 75J Swinging hammer ,the specimen cross-section used for the 10 × 10mm; testing machine has a larger impact energy, so mainly for the ferrous metals of larger impact toughness testing , such as iron and steel and their alloys.

The use of the difference of potential energy between prior  impact and the remaining  potential energy ,showing the degree on the scale, getting  the sample to absorb reactive power; It is  semi-automatic testing machine on the operation, easy to operate, efficient for working, after cutting off the  specimen, the remaining energy of the automatic swinging will be ready to do the next impact testing, so  in laboratory of doing cantonal testing and other metallurgy, machinery manufacturing departments of doing  substantial impact test ,this machine can  manifest better advantages.
     If users want to expand its function, according to ASTM E23-81 "metal material notch impact test pilot" for the impact test, they can also contact us for special set of custom-made to meet this standard bob (150J, 75J, and a pair of abutment).
Main technical specifications
1. Impact energy: 150J, 75J
2. The graduation range and division range of the scale

Energy range: 0-150J 0-75J
Each small grid pointing value: 2J 1J
3. The force value of the swinging hammer (the impact of constants): 0-150J 0-75J
4. The pre angle of swinging hammer: 150 °
5. The distance between the center of rotation and the impact point (specimen center): 750mm
6. Impact speed: 5.2m / s
7. Span of the specimen abutment: 40mm
8. The round angle of the clamping mouth: R1-1.5mm
10.the round angle of the pounding knife edge: R2-2.5mm
11. Specimen specifications: 55 × 10 × 10mm
12. The net weight testing machine: 450kg
13. The external form dimension of the testing machine: 2124 × 600 × 1340mm
14. Power Supply: Three-phase four-wire 50Hz, 380V, 250W (main motor)